Scope Mounts

Convert Your Mosin Nagant into a Modern Hunting Rifle!

• Military Type III Anodized, 6061 T6 Aluminum Scope Mount
• Allows Scope to be Mounted Over the Receiver
• Bolt Handle Made of Polished Stainless Steel
• Assembly Hardware and Detailed Instructions Included
• Manufactured in the USA
• Limited Lifetime Warranty

Fits Most Round and Hex Receivers

Convert Your Mosin Nagant into a Modern Hunting Rifle!

• Military Type III Anodized, 6061 T6 Aluminum Scope Mount
• Allows Scope to be Mounted Over the Receiver
• Assembly Hardware and Detailed Instructions Included
• Manufactured in the USA
• Limited Lifetime Warranty

Fits Most Round and Hex Receivers

Scope your Mosin while preserving its historic integrity.

Steel Picatinny Rail, Mounts Over Rear Sight Block

***PLEASE READ SPECIFICATIONS & FITMENT NOTES BEFORE PURCHASING***

There is no need for bent bolt handle with this Mount.

FEATURES: Allows for mounting of Scout Scope or other long eye relief optics on your military surplus Mosin Nagant model 91/30 without the need to drill & tap receiver or make any permanent modifications to the firearm. It is designed to fit over rear sight block in order to allow for continued use of the original fixed/iron sights up to 100 meters. The Mount is rigid steel construction with Black Oxide finish. 100% Lifetime Warranty!

Fits:

 Russian/Soviet M9130

SPECIFICATIONS: The Mount will accommodate a front to back (horizontal) pin center distance of 1.39″ (35.3mm) to 1.82″ (46.7mm) and allows for .039″ (1mm) of up and down (vertical) movement. The Mount is designed to fit over rear sight blocks that measure between .750″(19.05mm) and .787″(20.00mm) wide. The total weight including hardware is 5.5 oz. We have made every reasonable effort to ensure that this product will fit the majority of M9130’s. However, due to the large number of these firearms produced over many years around the world, it is impossible for us to allow for all manufacturing variation. Proper tightening of all hardware should result in no movement of the mount during normal firing recoil. If for any reason our Mount does not work with your specific 9130 it can be returned (undamaged) for a full refund.

UNIT:

Mount: CNC laser cut perimeter, die punched holes and mounting slots, form tapped threads and die press formed. 3/32″ (13 ga.) thick HR, P&O type CS-B A569 carbon steel; 40000 psi yield strength. Black Oxide plated.

Picatinny Rail: CNC machined to MIL-STD-1913. 8″ long. HR ATSM A36 low carbon steel; 36000 psi yield strength. Black Oxide plated.

Screws: #10-32 x ¼” flat head socket cap screws. Alloy steel; Rc 38-45 hardness.

HARDWARE:

Bolts: M3x.5 X 30mm socket head cap screw. Grade 12.9 medium carbon Q&T alloy steel; Rc 38-44 hardness; 160000 psi yield strength, 177000 psi tensile strength; 1.67 ft lbs tightening torque.

Nuts: M3x.5 Hex Nut. Grade 2 low carbon steel; Rc 32 hardness; 60000 psi tensile strength. Black Oxide plated.

Lock Washers: 3mm cut spring lock washer. Steel. Black Oxide plated.

Flat Washers: 3mm plain flat washer. Steel. Black Oxide plated

TOOLS PROVIDED:

Wrench: 2.5mm short arm hex key. Steel.

Drill: 3.00x41x70mm HSS Jobber. *Note: Drill is provided as a means to clean out or straighten existing pin holes.*

Punch: 3/32″ x 7/8″ dowel pin. Hardened 4140 alloy steel; Rc 47. ¼” x 2″ Aluminum handle. *Note: This punch is not designed to be used on difficult to remove pins such as those soldered in place.*

Complete installation instructions are supplied.

SCOPE & RINGS ARE NOT PROVIDED!

This Mosin Nagant Scope Mount features:

• Round receiver support
• 6061 aluminum construction
• Special hard coating that reduces chipping and scratching
• Resistance to salt spray corrosion
• 3 mounting points (two on the top forward part of the receiver and one on the left side of the receiver in the stripper clip guide area). Our scope mounts use the same top two mounting points as some similar mounts on the market.
• No stock inletting needed (unless you are using a Boyd’s replacement stock). You may need to do some light sanding around the receiver area
• Design that allows the shooter to get a lower, more proper check weld
• Places scope closer for better eye relief
• Supports the rear of the scope to eliminate movement for improved accuracy, unlike other mounts on the market
• Testing up to 800 yards with sub MOA results. Try that with your mount!

This scope mount includes:

• 3 mounting screws
• Allen wrench

This Mosin Nagant Scope Mount features:

• Hex receiver support
• 6061 aluminum construction
• Special hard coating that reduces chipping and scratching
• Resistance to salt spray corrosion
• 3 mounting points (two on the top forward part of the receiver and one on the left side of the receiver in the stripper clip guide area). Our scope mounts use the same top two mounting points as some similar mounts on the market.
• No stock inletting needed (unless you are using a Boyd’s replacement stock). You may need to do some light sanding around the receiver area
• Design that allows the shooter to get a lower, more proper check weld
• Places scope closer for better eye relief
• Supports the rear of the scope to eliminate movement for improved accuracy, unlike other mounts on the market
• Testing up to 800 yards with sub MOA results. Try that with your mount!

This scope mount includes:

• 3 mounting screws
• Allen wrench

This Mosin Nagant Scope Mount features:

• 6061 aluminum construction
• Special hard coating that reduces chipping and scratching
• Resistance to salt spray corrosion
• 3 mounting points (two on the top forward part of the receiver and one on the on the rear site area, (note:rear site blade will need to be removed to allow for drilling and in insertion of roll pin). Our scope mounts use the same top two mounting points as some similar mounts on the market.
• No stock inletting needed
• Design that allows the shooter to get a lower, more proper check weld
• Longer rail allows the greater adjustment and scope placement.
• Supports the rear of the scope to eliminate movement for improved accuracy, unlike other mounts on the market
• Testing up to 300 yards with outstanding results. Try that with your mount!

This scope mount includes:

• 2 mounting screws
• Allen wrench
• Drill Bit
• Roll Pin
• Detailed installation instructions

Barska’s M-44 Monsin-Nagant 91 Scope Mount Picatinny base for the renowned M-44 Mosin Nagant Sniper rile.T6 Aluminum construction results in durability and lighter weight while the rugged cross slot bolts secure the bracket to provide extreme rigidity.

Description: M-44 Mosin Nagant 91 Scope Mount
Rail Type: Picatinny
Rail Length: 6.5 inch
Material: T6 Aluminum
Color/Finish: Black/Matte
Applicable Firearm: M-44 Mosin Nagant
Warranty: Manufacturer 1 Year Limited

FEATURES

•  Black anodized aircraft grade aluminum
•  Accepts all standard Weaver / Picatinny 1913 accessories
•  No drilling, tapping, or gunsmithing required
•  Mounts to rear sight of models 91/30, M44, M38, M39
and Chinese 53
•  Allows mounting of long eye relief scopes to standard rifle